|
M5Unit-RFID 0.2.0 git rev:79c1939
|
| ▼CNFCLayerA::Adapter | |
| Cm5::nfc::AdapterMFRC522 | |
| ▼CNFCLayerB::Adapter | |
| Cm5::nfc::AdapterWS1850SForB | |
| Cm5::uhf::ChannelLevels | Signal level measured on each channel of the operating region |
| ▼CComponent | |
| ▼Cm5::unit::UHFRFIDComponent | Non-instantiable base class for UHF-RFID reader units |
| Cm5::unit::UnitJRD4035 | UHF-RFID unit based on the JRD-4035 module (magicRF M100) |
| ▼Cm5::unit::UnitMFRC522 | Radio frequency identification unit |
| Cm5::unit::UnitWS1850S | Radio frequency identification unit |
| ▼Cm5::unit::UHFRFIDComponent::config_t | Settings for begin |
| Cm5::unit::UnitJRD4035::config_t | Settings for begin |
| ▼Cm5::unit::UnitMFRC522::config_t | Settings for begin |
| Cm5::unit::UnitWS1850S::config_t | Settings for begin / configureNFCMode |
| Cm5::unit::m100::DemodulatorParameters | Receiver settings that decide how weak a reply the reader can still make sense of |
| Cm5::uhf::Epc | EPC of a tag |
| Cm5::unit::m100::Frame | Parsed frame |
| Cm5::uhf::LockSetting | One entry of a lock operation. Targets left out keep their current lock state |
| Cm5::uhf::ModuleInformation | Reader module information |
| Cm5::uhf::NxpConfigWord | Config-Word of an NXP UCODE G2iM or G2iM+, spelled out |
| Cm5::uhf::QTParameters | QT control word of an Impinj Monza 4QT |
| Cm5::uhf::QueryParameters | EPC Gen2 query parameters |
| Cm5::uhf::SelectParameter | The mask the reader holds, and how it is matched |
| Cm5::uhf::Tag | A tag, as the EPC Gen2 standard calls it |
| Cm5::unit::m100::TagOperationResult | What a tag answered to Read, Write, Lock or Kill |
| Cm5::uhf::Tid | TID of a tag |
| Cm5::uhf::TidReadPlan | What to read next of a tag's TID, given what has been read of it so far |
| Cm5::uhf::UHFLayer | EPC Gen2 semantics layer for UHF-RFID reader units |
| Cm5::uhf::detail::VendorEntry | A named mask designer paired with the name the registry spells it out as |