- Generated by
1.11.0
|
M5Unit-THERMO 0.3.0 git rev:4c4f8b5
|
This is the complete list of members for m5::unit::UnitThermal2, including all inherited members.
| begin() override (defined in m5::unit::UnitThermal2) | m5::unit::UnitThermal2 | virtual |
| changeI2CAddress(const uint8_t i2c_address) | m5::unit::UnitThermal2 | |
| config() | m5::unit::UnitThermal2 | inline |
| config(const config_t &cfg) | m5::unit::UnitThermal2 | inline |
| isHolding() | m5::unit::UnitThermal2 | inline |
| isPressed() const | m5::unit::UnitThermal2 | inline |
| M5_UNIT_COMPONENT_PERIODIC_MEASUREMENT_ADAPTER_HPP_BUILDER(UnitThermal2, thermal2::Data) (defined in m5::unit::UnitThermal2) | m5::unit::UnitThermal2 | protected |
| measureSingleshot(thermal2::Data &page0, thermal2::Data &page1) | m5::unit::UnitThermal2 | |
| read_data(thermal2::Data &data) (defined in m5::unit::UnitThermal2) | m5::unit::UnitThermal2 | protected |
| read_data_status(uint8_t s[2]) (defined in m5::unit::UnitThermal2) | m5::unit::UnitThermal2 | protected |
| read_function_control_bit(const uint8_t bit, bool &enabled) (defined in m5::unit::UnitThermal2) | m5::unit::UnitThermal2 | protected |
| read_register(const uint8_t reg, uint8_t *v, const uint32_t len) (defined in m5::unit::UnitThermal2) | m5::unit::UnitThermal2 | inlineprotected |
| read_register16BE(const uint8_t reg, uint16_t &v) (defined in m5::unit::UnitThermal2) | m5::unit::UnitThermal2 | inlineprotected |
| read_register16LE(const uint8_t reg, uint16_t &v) (defined in m5::unit::UnitThermal2) | m5::unit::UnitThermal2 | inlineprotected |
| read_register8(const uint8_t reg, uint8_t &v) (defined in m5::unit::UnitThermal2) | m5::unit::UnitThermal2 | inlineprotected |
| readAlarmBuzzer(const bool highlow, uint16_t &freq, uint8_t &interval) | m5::unit::UnitThermal2 | |
| readAlarmEnabled(uint8_t &enabled_bits) | m5::unit::UnitThermal2 | |
| readAlarmLED(const bool highlow, uint32_t &rgb) | m5::unit::UnitThermal2 | |
| readAlarmTemperature(const bool highlow, uint16_t &raw) | m5::unit::UnitThermal2 | |
| readAlarmTemperature(const bool highlow, float &celsius) | m5::unit::UnitThermal2 | |
| readButtonStatus(uint8_t &bs) | m5::unit::UnitThermal2 | |
| readBuzzer(uint16_t &freq, uint8_t &duty) | m5::unit::UnitThermal2 | |
| readBuzzerControl(bool &enabled) | m5::unit::UnitThermal2 | inline |
| readBuzzerEnabled(bool &enabled) | m5::unit::UnitThermal2 | inline |
| readFirmwareVersion(uint16_t &ver) | m5::unit::UnitThermal2 | |
| readFunctionControl(uint8_t &value) | m5::unit::UnitThermal2 | |
| readI2CAddress(uint8_t &i2c_address) | m5::unit::UnitThermal2 | |
| readLED(uint32_t &rgb) | m5::unit::UnitThermal2 | |
| readLEDEnabled(bool &enabled) | m5::unit::UnitThermal2 | inline |
| readNoiseFilterLevel(uint8_t &level) | m5::unit::UnitThermal2 | |
| readRefreshRate(thermal2 ::Refresh &rate) | m5::unit::UnitThermal2 | |
| readTemeratureMonitorSize(uint8_t &wid, uint8_t &hgt) | m5::unit::UnitThermal2 | |
| request_data() (defined in m5::unit::UnitThermal2) | m5::unit::UnitThermal2 | protected |
| start_periodic_measurement(const thermal2::Refresh rate) (defined in m5::unit::UnitThermal2) | m5::unit::UnitThermal2 | protected |
| start_periodic_measurement() (defined in m5::unit::UnitThermal2) | m5::unit::UnitThermal2 | protected |
| startPeriodicMeasurement(const thermal2::Refresh rate) | m5::unit::UnitThermal2 | inline |
| startPeriodicMeasurement() | m5::unit::UnitThermal2 | inline |
| stop_periodic_measurement() (defined in m5::unit::UnitThermal2) | m5::unit::UnitThermal2 | protected |
| stopPeriodicMeasurement() | m5::unit::UnitThermal2 | inline |
| UnitThermal2(const uint8_t addr=DEFAULT_ADDRESS) (defined in m5::unit::UnitThermal2) | m5::unit::UnitThermal2 | inlineexplicit |
| update(const bool force=false) override (defined in m5::unit::UnitThermal2) | m5::unit::UnitThermal2 | virtual |
| wasClicked() | m5::unit::UnitThermal2 | inline |
| wasHold() | m5::unit::UnitThermal2 | inline |
| wasPressed() | m5::unit::UnitThermal2 | inline |
| wasReleased() | m5::unit::UnitThermal2 | inline |
| write_function_control_bit(const uint8_t bit, const bool enabled) (defined in m5::unit::UnitThermal2) | m5::unit::UnitThermal2 | protected |
| writeAlarmBuzzer(const bool highlow, const uint16_t freq, const uint8_t interval) | m5::unit::UnitThermal2 | |
| writeAlarmEnabled(const uint8_t enabled_bits) | m5::unit::UnitThermal2 | |
| writeAlarmLED(const bool highlow, const uint32_t rgb) | m5::unit::UnitThermal2 | inline |
| writeAlarmLED(const bool highlow, const uint8_t r, const uint8_t g, const uint8_t b) | m5::unit::UnitThermal2 | |
| writeAlarmTemperature(const bool highlow, const uint16_t raw) | m5::unit::UnitThermal2 | |
| writeAlarmTemperature(const bool highlow, const T celsius) | m5::unit::UnitThermal2 | inline |
| writeBuzzer(const uint16_t freq, const uint8_t duty, const bool verify=true) | m5::unit::UnitThermal2 | |
| writeBuzzerControl(const bool enabled) | m5::unit::UnitThermal2 | inline |
| writeBuzzerDuty(const uint8_t duty) | m5::unit::UnitThermal2 | |
| writeBuzzerEnabled(const bool enabled) | m5::unit::UnitThermal2 | inline |
| writeFunctionControl(const uint8_t value, const bool verify=true) | m5::unit::UnitThermal2 | |
| writeLED(const uint32_t rgb, const bool verify=true) | m5::unit::UnitThermal2 | inline |
| writeLED(const uint8_t r, const uint8_t g, const uint8_t b, const bool verify=true) | m5::unit::UnitThermal2 | |
| writeLEDEnabled(const bool enabled) | m5::unit::UnitThermal2 | inline |
| writeNoiseFilterLevel(const uint8_t level) | m5::unit::UnitThermal2 | |
| writeRefreshRate(const thermal2::Refresh rate) | m5::unit::UnitThermal2 | |
| writeTemeratureMonitorSize(const uint8_t wid, const uint8_t hgt) | m5::unit::UnitThermal2 | |
| ~UnitThermal2() (defined in m5::unit::UnitThermal2) | m5::unit::UnitThermal2 | inlinevirtual |
1.11.0